Negotiable
The date of payment from buyers deliver within days
Henan
Long-term effective
2019-11-03 11:36
321
Company Profile
Besharp Diamond Co.,LtdBy certification [File Integrity]
Contact:hnjinrui(Mr.)
Email:
Telephone:
Phone:
Area:Henan
Address:Henan
Website:http://www.hnbesharp.com/ http://hnjinrui.sz-adapter.com/
Product Introduction
The PDC (Polycrystalline Diamond Compact) Mining Drill Bits with high quality PDC cutters are used as the cutting teeth. The bits have high wear resistance, high impact resistance which can improve drilling efficiency. The bits are used in advanced welding technology, which can guarantee the bits' high welding strength, longer life and high comprehensive construction efficiency. The Mining Drill Bits is suitable for wide-range rock formations and it have high ration of finish holes with no hole shrinkage.
The Mining Drill Bits is also available for blast hole drilling, roof bolting and exploration in diameters from 24 mm up to 150 mm with all common use threads. In general, our drill bits are equipped with PDC inserts.
Features
The PDC Mining Drill Bits are the most basic part of coal mine roadway support. It combines the surrounding rock of the roadway and at the same time, self-supports the surrounding rock. It is a drill for fixing coal mine bolts. PDC (Polycrystalline Diamond Compact) is used as the cutting teeth on the two wings of the PDC roof bolt drill bit. And the application of PDC has greatly improved the drilling efficiency of the top bolt bit and gradually replace the tungsten carbide roof bolt bit.
Advantage
1. Adopt diamond cutting teeth for higher drilling speed and longer service life. Suitable for soft and medium hardness formations.
2. With wear-resistant inserts, PDC mining drill bits do not require polishing and are easy to operate.
3. No pore shrinkage and high porosity.
4. Years of manufacturing experience.
Application
Suitable for bolt mesh support of coal mining, etc.
Specification
Diameter (mm) |
PDC cutter NO. (1304) |
Wings |
Water holes |
Drilling ways |
Thread |
25.4mm, 27mm |
2PCS |
2 |
NO. |
Dry drilling/ |
Hex Drive |
27mm, 28mm, |
2PCS |
2 |
1 |
Wet drilling |
M14*1.5,M16*2,R17,R22 |
40mm, 42mm, 45mm, 48mm |
2PCS |
2 |
1 |
Wet drilling |
M14*1.5,M16*2,R17,R22 |
We can also produce and design according to each customer's drawings/samples/requirements.
Material
PDC (Polycrystalline Diamond) Cutter & Carbide Steel
Packaging
1 or 2 pieces are packed in a plastic box and then packed in a carton
http://www.hnbesharp.com/